To perform a DIY trailer brake conversion, follow these systematic steps provided by Axle Inc. to ensure a safe and effective installation:
- Preparation and Safety: Begin by assessing your current brakes and axle compatibility. Measure axle dimensions (width, hub face, and spring centers) to ensure the conversion kit matches your load ratings and bolt patterns. Always wear protective gear and disconnect the trailer battery before starting.
- Unpack the Kit: Open your hydraulic disc brake conversion kit and verify that all components, including calipers, rotors, hoses, and fittings, are present and undamaged.
- Mount the Rotors: Securely attach the brake rotors to the trailer axle hubs. Use a torque wrench to tighten the bolts to 80-100 ft-lbs.
- Install the Calipers: Position the calipers over the rotors and align them with the mounting brackets. Tighten the bolts to 25-30 ft-lbs and ensure the pistons move freely.
- Connect Hydraulic Lines: Route the brake hoses from the actuator to each caliper. Use flare fittings for secure seals and bleed the system with DOT 3 fluid to remove all air.
- Wire the Actuator: If performing an electric over hydraulic upgrade, connect the actuator to the trailer’s brake controller output and ground it to the frame. Test the system with 12V power.
- Final Inspection: Check all connections for leaks and perform a low-speed test tow. It is highly recommended to have a professional inspection following a DIY installation to guarantee long-term safety.
Related FAQs
-
What are the Best Axles for Cargo Trailers?
Read More »: What are the Best Axles for Cargo Trailers?Selecting the best axle for a cargo trailer depends on your specific hauling needs, terrain, and required load capacity. At Axle Inc., we recommend Dexter axles as a top choice for their reliability and range of capacities, which span from…
-
What are the Available Cargo Trailer Axle Capacities?
Read More »: What are the Available Cargo Trailer Axle Capacities?Cargo trailer axle capacities vary widely to accommodate different hauling needs, ranging from lightweight utility tasks to heavy-duty commercial applications. Standard capacity options include: 600 to 3,500 lbs: Ideal for small utility trailers and lighter loads. 6,000 lbs: Designed for…
-
How do I Install Heavy Duty Trailer Axles?
Read More »: How do I Install Heavy Duty Trailer Axles?Installing heavy duty trailer axles requires precise preparation and execution to ensure safety and performance. Before beginning, evaluate your trailer’s load requirements and gross vehicle weight rating (GVWR) to select the appropriate axle capacity (typically ranging from 3.5K to 7K).…
-
What are the Common Types of Axles for Cargo Trailers?
Read More »: What are the Common Types of Axles for Cargo Trailers?When selecting axles for cargo trailers, there are two primary design types used in commercial hauling, each with specific advantages depending on the terrain and maintenance preferences: Leaf Spring Axles These are a robust and more affordable upfront option. They…
-
What is the Difference between Torsion Axles and Leaf Spring Axles?
Read More »: What is the Difference between Torsion Axles and Leaf Spring Axles?When comparing torsion axles to leaf spring axles, the primary differences lie in their design, ride quality, and maintenance requirements. Torsion axles utilize rubber cords encased in a square tube to provide independent wheel movement. This results in a smoother,…