Converting trailer brakes to an electric over hydraulic system is a multi-step process that involves upgrading your trailers stopping power and control. According to Axle Inc., the process generally follows these steps:
- Preparation and Compatibility: Start by measuring your axle dimensions (width, hub face, and spring centers) to ensure the conversion kit fits your specific axle type and load rating. This is critical for trailers hauling over 7,000 lbs.
- Component Mounting: Unpack your hydraulic disc brake conversion kit and secure the brake rotors to the axle hubs, torquing them to 80-100 ft-lbs. Next, install the hydraulic calipers over the rotors and tighten the bolts to 25-30 ft-lbs.
- Plumbing and Wiring: Route hydraulic brake hoses from the actuator to each caliper using flare fittings for secure seals. Bleed the system with DOT 3 fluid to remove any air. For the electric over hydraulic component, wire the 12V actuator to the trailer brake controller output and ground it to the frame.
- Testing: Inspect all connections for leaks and perform a low-speed test tow to confirm the system is syncing correctly with your tow vehicle.
Professional installation is recommended to ensure compliance with SAE safety standards and to guarantee proper alignment for smoother, proportional braking.
Related FAQs
-
What are the Best Axles for Cargo Trailers?
Read More »: What are the Best Axles for Cargo Trailers?Selecting the best axle for a cargo trailer depends on your specific hauling needs, terrain, and required load capacity. At Axle Inc., we recommend Dexter axles as a top choice for their reliability and range of capacities, which span from…
-
What are the Available Cargo Trailer Axle Capacities?
Read More »: What are the Available Cargo Trailer Axle Capacities?Cargo trailer axle capacities vary widely to accommodate different hauling needs, ranging from lightweight utility tasks to heavy-duty commercial applications. Standard capacity options include: 600 to 3,500 lbs: Ideal for small utility trailers and lighter loads. 6,000 lbs: Designed for…
-
How do I Install Heavy Duty Trailer Axles?
Read More »: How do I Install Heavy Duty Trailer Axles?Installing heavy duty trailer axles requires precise preparation and execution to ensure safety and performance. Before beginning, evaluate your trailer’s load requirements and gross vehicle weight rating (GVWR) to select the appropriate axle capacity (typically ranging from 3.5K to 7K).…
-
What are the Common Types of Axles for Cargo Trailers?
Read More »: What are the Common Types of Axles for Cargo Trailers?When selecting axles for cargo trailers, there are two primary design types used in commercial hauling, each with specific advantages depending on the terrain and maintenance preferences: Leaf Spring Axles These are a robust and more affordable upfront option. They…
-
What is the Difference between Torsion Axles and Leaf Spring Axles?
Read More »: What is the Difference between Torsion Axles and Leaf Spring Axles?When comparing torsion axles to leaf spring axles, the primary differences lie in their design, ride quality, and maintenance requirements. Torsion axles utilize rubber cords encased in a square tube to provide independent wheel movement. This results in a smoother,…